Image 1 of 2
Image 2 of 2
Benefits
Versatility: Suitable for stain removal, fire restoration, brightening colours, and deodorising.
Alkaline Formula: Provides unique cleaning solutions where Hydrogen Peroxide-based products may be less effective.
Stain Removal: Targets tough tannins, coffee, Fanta, grass, and organic stains like blood.
Fire Restoration: Removes smoke shadows, greying, and persistent odours from fire-damaged areas.
Safe for Most Surfaces: Works on carpets, painted walls, ceilings, and various other water-cleanable surfaces.
Applications & surface suitability
Safe and ideal for use on practically all water cleanable surfaces, including painted walls, ceilings, carpets, soft furnishings, lacquered wood, metals, tiles, lino, natural stone and concrete. Care should be exercised when working with pH-sensitive substrates, such as natural fibres. It is recommended that a neutralising acid rinse follow a cleaning rinse.
How to use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Dilutions
Add 10-20g Oxyboost Plus per litre of water or ready to use cleaning solution.
Oxyboost Plus should not be added to acidic solutions, deodorisers, chlorine or enzyme products.
Oxyboost Plus can be added to fire restoration detergents, carpet & upholstery presprays, alkaline tile cleaning detergents, water-based degreasers.
Warm or hot water/cleaning solutions will improve performance.
Stir well and use solution within 30 minutes.
Application
Hard surface & carpet cleaning applications:
Cover areas not being cleaned. Only apply solution to an area which can be cleaned and rinsed within 30-40 minutes. Follow typical hard surface, carpet & fire restoration cleaning techniques.
Apply the solution to a workable area using a sprayer, sponge or scrubber machine.
Agitate and allow 15 to 30 minutes dwell time.
Rinse the surface thoroughly using clean water. Carpets and soft furnishings are best rinsed using carpet wet extraction equipment using a 1:100 Rinse Pro solution.
Spot removal from carpets and fine stone:
Add Oxyboost Plus to a warm/hot prespray or tile cleaning solution (non-acidic). Neutral pH product solutions generally work best. The Oxyboost Plus solution can also be made up using water only.
Apply the solution to the affected area.
Agitate and allow 15 to 30 minutes dwell time and re-agitate.
Rinse the surface thoroughly using clean water. Carpets and soft furnishings are best rinsed using wet extraction carpet equipment with a 1:100 Rinse Pro solution.
Tip: Spot removal from marble and porous, hard surfaces can also be achieved by applying one scoop of OxyBoost Plus powder direct to the surface. Apply a little hot water and using a non-scratch scourer mix and scrub to form a paste over the spot. Allow 10-15 minutes dwell time. Scrub again and rinse with clean water.
Garments & loose furnishings:
Ensure items are water washable. Pre-check for special washing directions provided by the manufacturer.
Mix up a soak solution of 200 to 500ml Fire Fix per 10Lt of warm/hot water (or commercial laundry liquid/powder). Add 50-100g OxyPlus. Mix well.
Soak affected garments and loose furnishings for 1 to 4 hours.
Rinse well in clean warm water.
Garments suited to machine washing should then be laundered as normal. Loose furnishings should be rinsed in a warm 1:200 solution of Rinse Pro.
