Actichem_Fibre_Shield_@2x.jpg
Actichem_Fibre_Shield_@2x.jpg

Fibre Shield 5L

from $85.00

Fibre Shield is a premium carpet protector designed to safeguard both nylon and wool carpeting from everyday mishaps. It forms a durable, highly repellent barrier on each fibre, effectively preventing water-based, oil-based, and red dye stains from penetrating deep into the carpet.

Fibre Shield’s advanced technology also repels dry soil, making vacuuming more efficient and extending the life of your carpet. Its water-based, low-VOC formulation ensures minimal environmental impact while maintaining a safe, wool-friendly application that preserves the integrity of delicate fibers.

Size:

Fibre Shield is a premium carpet protector designed to safeguard both nylon and wool carpeting from everyday mishaps. It forms a durable, highly repellent barrier on each fibre, effectively preventing water-based, oil-based, and red dye stains from penetrating deep into the carpet.

Fibre Shield’s advanced technology also repels dry soil, making vacuuming more efficient and extending the life of your carpet. Its water-based, low-VOC formulation ensures minimal environmental impact while maintaining a safe, wool-friendly application that preserves the integrity of delicate fibers.

Benefits

  • Advanced Stain Resistance: Forms a durable, highly repellent barrier against water-based and oil-based stains, including everyday spills and grime.

  • Red Dye Protection: Specialty red dye blockers help prevent permanent staining from acidic dye spills like red cordial.

  • Dry Soil Release: Helps dry soils release easily from carpet fibres, improving vacuuming efficiency and carpet longevity.

  • Easier Cleaning: Makes routine carpet cleaning faster and more effective, as soiling is released more easily during wet extraction.

  • Low VOC Formula: Water-based, low-VOC formulation ensures safer indoor air quality and minimal environmental impact.

  • Wool-Friendly: Exceeds industry specifications for the safe protection of wool, maintaining fibre integrity.

Application areas and surface suitability

Fibre Shield is a premium protector for carpets

How to use

Always pre-test in an inconspicuous location for substrate sensitivity to chemicals.
Ensure that the carpet is clean and free of chemical residue. If wet extraction cleaning is to be done prior to the protection treatment, it is best to finish with an acid rinse. Leave the carpet as dry as possible
Can be applied to dry or damp fabric.

Dilutions

  • Dilute 1:2 for clean damp carpets. Apply at a rate of 340 to 510ml per 5m2. (1 gallon per 400 to 600sq.ft)

  • Dilute 1:4 for clean dry carpets. Apply at a rate of 575 to 850ml per 5m2. (1 gallon per 250 to 350sq.ft)

  • See Actichem protector coverage charts.

Application

  1. Spray Fibre Shield from 25 to 50cm away from the carpet using smooth back and forth motion overlapping slightly.

  2. Start by applying one coat to high traffic areas. Then starting from one end of the room, treat all the carpeted area including the high traffic areas previously treated.

  3. Brush with a soft brush to spread protector evenly.

  4. Align fabric and speed dry.